Installing Congree on a Server Host

Owned by Claudius Hörth
Last updated: Okt. 09, 2024

The Deployment Assistant indicates the installation steps with short texts and tooltips. The following section especially explains the behavior of the field for the progress display.

Important:

For a distributed Congree installation, the installation step must be performed on every host that has been assigned client or server components.

Requirements

  • You have configured a viable Congree installation.
  • You are on a host on which you want to install Congree.
  • You are in the Install Congree Components menu of the Deployment Assistant.

How to Verify your Installation

  1. Enter the host name or the IP address of the host on which the configuration was performed with the Deployment Assistant in the respective input field.

    1. The Deployment Assistant will remember your input for the next installation/update.


  2. Click Verify:

    1. The Deployment Assistant will check whether the installation can be successfully performed.
  1. The verification runs without problems. The installation can be carried out successfully.
  2. The verification process detects version incompatibility that results in one or more components not being installed. Press Close and change your configuration. Alternatively, you can choose Install to perform the installation without the corresponding components.


Verification – Verification Steps

  1. Verification whether the components to be updated are currently in operation
  2. Verification of the host on which the Congree installation was configured
  3. Verification whether all Congree system requirements are met
  4. Check whether the Congree versions of the components are compatible
  5. Verification of the installed Across version

Verification whether the selected editors are installed
7. Verification whether the selected editors are installed

Verification – List of Components to Be Installed

How to Perform the Installation

  1. Following the successful verification, click Install.

    1. The Congree components will be installed consecutively.
    2. You will receive a success message for every installed component.
    3. The Deployment Assistant will display the successful completion of your installation.

Next Steps

  • Open the Congree Control Center and activate your Congree license:

    Further information: see Congree Control Center manual