Configuring the Congree Bulk Check Service Component

The Congree Bulk Check Service component must be configured in order to use the Congree Bulk Check Service for the Language Check and the Congree Web Interface.

How to configure the protocol of the Congree Bulk Check Service:

1. Click the following button of the component:
   

   1. A dialog box will open:
      
2. Select the protocol that the Congree Bulk Check Service should use for its communication.
3. Click OK.
4. You have configured the protocol to be used.

How to configure the Language Check subcomponent:

1. Click the following button of the subcomponent:
   

   1. An input window will open up:
      
2. Select the languages for which you want to install the Language Check of the Congree Bulk Check Service.
3. Click OK.
4. You have configured the subcomponent.

How to configure the Congree Web Interface subcomponent:

1. Click the following button of the subcomponent:
   

   1. An input window will open up:
      
2. Enter the field IDs in the input screen and click the + button.
3. After entering all of the field IDs, click OK.
4. You have configured the subcomponent.