In Congree TermTiger, you can create any field you need. This is done in the field configuration section at Congree TermTiger → Configuration → Fields.
To learn more about possible fields and their purpose purposes, refer to Field types.
Tool bar
Add
Click Add to create a new field.
A) Field nameName: The name you select here will later appear in your TermBase and also in the Terminology Research Panel in Congree.
B) Field Level: Decide whether
...
your field will be available
...
at the concept level or
...
the term level.
C) Field Type: Select
...
the type
...
of field
...
.
D) Field valuesValues: If your field is a picklist, you can create
...
as many picklist values as you need here.
E) Translate contentContent: If your field is a text field, you can configure it to have translatable content
...
, such as a definition.
F) Save/Close: Click Save to keep your field and all
...
configurations, or click Close to cancel the operation.
Clone
Click Clone to apply the current field configuration
...
to another
...
TermBase.
Enter the name of the target TermBase and click Clone.
Export
Click Export to store the current field configuration to disk.
Import
Click Import to load a field configuration previously stored to disk.
TermBase Status
Set the TermBase status to Off whenever you want to edit fields.
| Info |
|---|
The TermBase will be unavailable for all users as long as the status is Off. |
Table
Field name
...
Name: Shows the name of the field as created.
Field levelLevel: Shows either Term or Concept, depending on the configured field level.
Field
...
Type: Shows the configured field type.
Field valuesValues: Shows all available field values for picklists, separated by a semicolon.
Translate contentContent: Shows whether a text field allows
...
multiple languages or not.
Operations
Some fields can be edited by clicking Edit. This allows you to change the name of the field.
Some fields can be deleted by clicking Delete. This will remove the field from your TermBase.